Did you play thin ice when you were little?? It was such a simple game, but so much fun! We’re celebrating 90’s Week and when looking for some game inspiration, I ran across a picture and thought, “I could make that!” Amazingly, I already had everything I needed to make my own version of a thin ice game, and you probably do too…
If you don’t know or don’t remember, the game was played by placing small-water covered beads on a paper towel-like piece of “ice” one-by-one until the water soaked through and broke the ice. The person who put the last bead on without it breaking won the game. Fairly simple, right? But when you add tongs and use water beads, this game becomes an insanely fun sensory and STEM experiment for toddlers! It’s still pretty darn fun for older kids too. 😉
To make a DIY Thin Ice game you’ll need:
Note: We prefer to shop locally or use what we have at home, but this list contains a few Amazon affiliate links for reference. As Amazon Associates we make a small commission on qualifying purchases.*
- Water Beads (we used these from Amazon)
- Cardboard (roughly 8″x8″)
- A Hot glue gun
- An Embroidery hoop
- Paper towels
- Small tongs
- A Couple small bowls or plates
- Acrylic Paint and a foam brush
DIY Thin Ice Game Instructions:
- Cut six support legs out of scrap cardboard and paint
Start by cutting 6 rectangles out of a piece of sturdy cardboard (mine measured 7″ long by 1.5″ wide) cut a notch into that top that’s about 1/2″ wide and 3/4″ deep. These are going to be the support legs the embroidery hoop rests in. You can make your legs taller is you want. I painted the sides with acrylic paint to give it a nice, finished look!
- Glue support legs together in pairs as shown
Each support leg is made by gluing 2 of the rectangles together lengthwise. Join at about a 45-degree angle as shown and glue together with a hot glue gun.
- Create the “thin ice” by securing a piece of paper towel in an embroidery hoop and push into the cardboard legs
Grab a piece of paper towel, and put it in an embroidery hoop (our hoop had an 8″ diameter). Trim the excess paper towel off and pop on the cardboard support legs. Place an empty bowl under your “ice” to catch the beads when it breaks.
- Fill a bowl with water and water beads and set out a pair of tongs
Put 1-2 cups of water beads into a bowl filled with water (you’ll want them to be wet) grab a pair of tongs, and you’re READY to PLAY!
Moving the water beads with the tongs is a wonderfully fun way for younger kids to practice fine motor skills in a new way! The game itself is also a great STEM experience and beginners science experiment – teaching small lessons in mass, density and gravity. Of course, the most exciting part is waiting for that fateful moment when the ice breaks and “plunk, plunk, plunk!” – all the water beads spill through the bottom!
Love this throwback game and can’t wait to share a few of your own childhood memories with your little? I’ve put together a round-up of some other classic 90’s games you can DIY!
*A note about Amazon affiliate links: We strive to use simple, earth-friendly supplies that can be purchased locally whenever we can, but sometimes we find the best universally available options, a rare eco-friendly find, or a niche product only available on Amazon. When included in our supply list, these products are affiliate links, and if you click-through to make a purchase, we receive a small commission that helps us re-order these supplies!